SEF Maxxflexx Heat Transfer Vinyl Application Instructions

Please following the recommendations below for the optimum results, we would always recommend running your own tests as heat presses may vary slightly.

Cutting Conditions:

• Blade - 30 to 45 degrees
• Force  - 40 to 50 gf
• Speed - 25 to 40

Application Conditions: 

• Temp: 150°C
• Time: 12 seconds
• Pressure: Medium (4 bar)
• Peel: Hot peel. (but can cold peel also)

Application Process:

• Cut your design using your cutter / plotter in mirror.

• Weed the design to remove the excess

• Transfer the design to your garment using the application settings above

• Remove the liner

• Cover with a protection sheet and press again, this is a practise of good measure to ensure longevity of the design.