TexJet echo2
      Back to home
      1. Help Centre
      2. PolyPrint
      3. TexJet echo2

      TexJet Echo 2 Replacing the Maintenance Cartridge

      How to properly replace the Maintenance cartridge once it has reached the end of its service life.

      • Replacing the Maintenance cartridge Maintenance tank needs to be reset-1

      Maintenance Cartridge Chip Levels should always be more than 50%. If it gets below 20%, a message that the “maintenance cartridge is at the end of its service life” will be displayed, and the cartridge cannot be reset. Replace the cartridge. 


      Procedure: 

      1. Open and close the Ink cartridge cover.
      2. Insert the new Maintenance cartridge.
      3. Open and close the Ink cartridge cover once again.