How do I remove the touch screen from my Stahls Fusion IQ heat press?

Sometimes the touch screen needs to be replaced or the connections need checking.

1. Insert the paper clip into the small hole on either side of the housing.

2. Push the paper clip until you hear two clicks: the first click will release the controller bezel, and the second click will eject it from the housing.

3. Remove the old controller and insert the new replacement controller.

4. Use your thumb to press on the two latch points until you hear a click. If the controller bezel doesn't sit flush with the housing plastic, it hasn't latched properly.

5. Plug in and turn on the heat press to check the function. Repeat the same process on the other side of the housing.