1 Paper System
For Hard Surfaces
Laser Printer Settings
White Toner
(CMYW)
OKI PRO8432WT
-
Mirror Image Mode
-
Media Type: Standard Printer Settings
-
Media Weight: Ultra Heavy Paper 3
-
Multi-Purpose Tray
-
+2 Colour Paper
OKI PRO7411/711WT & PRO9420/920WT
-
Mirror Image Mode
-
Media Type: Standard Printer Settings
-
Media Weight: Ultra Heavy Paper 3
-
Multi-Purpose Tray
-
+3 White Toner Density
Forever TransferRIP
-
Mirror Image Mode
-
Media Type: Ultra Heavy Paper 3
-
Automatic Tray Detection
5-Colour (5C) Printer
(CMYKW)
OKI PRO9541WT
-
Mirror Image Mode
-
Media Type: FORVLDLT
-
Fill up White: max. 60%
-
Multi-Purpose Tray
-
+3 White Density
Forever TransferRIP
-
Mirror Image Mode
-
Media Type: Ultra Heavy Paper 3
-
Automatic Tray Detection
CMYK
OKI c834 (c8x4-Series)
-
Mirror Image Mode
-
Media Type: UserType 8
-
Multi-Purpose Tray
Other models
-
Transparency/Heavy Paper 3 or similar paper type.
-
Contact your dealer to see if your CMYK laser printer is compatible.
Transfer Process:
-
Pre-press your substrate/product with the recommended silicone pad and settings from the table below.
-
Place your design on your substrate/product (printed-side facing down) and if necessary, fix it with heat-resistant tape.
-
Press your transfer with the parameters indicated below and cover it with the recommended silicone pad in the table below.
-
Peel the transfer paper by using the recommended settings from the table below.
ATTENTION: At this point, the substrate is very hot. Take precautions while handling it. -
If indicated in the table below, re-press your substrate/product with the same temperature as in step 3 for about 2-5 sec.
Settings
Tips & Tricks
-
Remove any dust, coatings, chemicals and greases from substrate/product-surfaces, prior to the transfer. Metal and glass surfaces can be cleaned with alcohol.
-
Using the Silicone Pad helps distribute the heat evenly across the transfer.
ATTENTION: The pressing parameters can vary when using a silicone pad. -
If you excess particles have been transferred, you can easily remove them by rubbing it with a cloth.