Laser Dark (No Cut)
      Back to home
      1. Help Centre
      2. Forever
      3. Laser Dark (No Cut)

      Forever Laser Dark and B Paper Tips

      Here are some tips when using the laser dark and B paper: 

       
      • Check the A-Foil
        Make sure you're printing on the matte side of the A-Foil. One side is glossy and the other is matte. 
         
      • Pre-warm
        Warm up the press bed and the B-Paper before printing to remove moisture and apply the first few prints of the day. 
          
      • Avoid white spots
        To prevent white spots from appearing on unprinted areas, place five sheets of copy paper on top of the B-Paper before applying the A-Foil. 
         
      • Use a slow, fluid motion
        When separating the B-Paper from the A-Foil, work slowly and use a fluid motion without lifting them off the heat press's lower plate. 
         
      • Check your printout
        Before starting the process, you can create multiple transfers from an A3 sheet and test them one by one. 
         
      • Use the heat press
        Work with the heat from the press and don't be too slow when separating the A and B. 
         
      • Get a feel for the media
        Learn how the media feels and when you can let it unroll itself at the end of the process. 
         
      • Dog ear the corner
        Dog ear the corner you peel from to make it easier to start peeling the sheets apart.
         
      • Grip the A sheet
        When separating the A and B sheets, grip the A sheet on the bottom. 
         
      • Don't come up away from the press
        Avoid coming up away from the press, as this can cause you to lose fine detail.