Forever
Laser transfer papers
Video tutorials
Laser Dark (No Cut)
- How do I gauge the correct pressure for the transfers?
- When Pressing the Laser Dark (no cut) on my press it is leaving a white residue on the base rubber and top plate – what is causing this?
- Can I purchase a cheap heat press to use with the transfer paper?
- Laser Dark (No Cut) Lite Instructions
- Laser Dark (No-cut) Instructions
- How many times can I use the Gloss Finishing sheets?
- How many times can I use the matt finishing sheets?
- What tray do I need to put my Forever paper in?
- Can I cut my A3 sheets down to A4 and use them in my printer?
- Can I heat press Laser Dark (no cut) to Softshell?
- Can I keep the glossy finish on my transfers?
- Can I press the transfer to polyester? Are the settings the same as cotton?
- Can I use a clam press with the Laser Dark (no cut) and what are the settings?
- Can I use any of the B paper with my Laser Dark A-foil?
- Can I use Laser Dark to print onto a Nylon Waterproof Jacket?
- I have a very solid image that I am producing and it will not peel smoothly?
- I have scratches on the A foil before I print onto it – what is this?
- The transfer will not peel off the garment and is tearing at the edges?
- My A Foil and B paper have ‘welded’ themselves together and will not separate?
- I use a Teflon sheet on my heat press or it is attached to the press – can I use this?
- I have a few white t-shirts to print, but don’t want to buy in Laser Light, can I use Laser Dark?
- When transferring the B paper to the A-foil the edges of the transfer don’t seem to transfer completely?
- I’m printing onto a sports t-shirt and the pale colours don’t look very bold, how can I improve this?
- What way round do I print on the transparent sheet / A Foil?
- When I’m pressing the transfer to the garment I don’t get a perfect transfer. Why is this?
- The B paper (glue) isn’t transferring completely over to the A-foil?
- If I’m printing onto a white t-shirt why do I still need to print white toner?
- When peeling away the transfer from the t-shirt I’m finding the paper gets left behind and won’t peel away cleanly. Why is this?
- I keep getting white speckled glue where there shouldn’t be any?
- How to stop white speckles appearing when pressing the A & B papers together
- Advice for printing white only designs
- The B paper glue isn't sticking to all of the toner in my design
- Recommended Times and Temperatures for Polyester and Delicate Fabrics
- Matte finishing paper VS protection paper
- Negative space in artwork?
- Cracking in transfer after or before washing (usually larger prints)
- Forever Laser Dark (No Cut) A Foil and B Paper-PRO recommended settings
- Is there a special technique I can use to separate the A and B papers?
- What is the best way to remove the laser dark A-foil from the garment?
- Why should I remove moisture from my garment before application?
- What is the difference between Forever B paper and Forever B paper PRO?
- Forever Laser Dark and B Paper Tips
Flex Soft (No Cut)
- Flex Soft (No Cut) Instructions
- Can Flex Soft print onto any coloured t-shirt?
- Can I mix Laser Light (no cut) and Flex Soft (no cut) together?
- The B paper (glue) isn’t transferring completely over to the A-foil?
- What way round do I print on the coloured sheet?
- What colour do I print on the back of the Flex Soft (no-cut) papers?
- How can I prevent white speckling with B-Paper Pro?
Laser Light (No Cut)
- Forever Laser Light (No Cut) recommended settings
- Ink is smudging on the Laser Light (no cut) sheet when it comes out of the printer?
- What are the best applications for the Laser Light (no cut)?
- Will the Laser Light (no cut) product leave a residue around my image when I have pressed it?
- Why should I use Laser Light (no cut) and not just use Laser Dark (no cut) for everything?
- Is it just white shirts that I can use Laser Light (no cut) on?
- When pressing to a t-shirt I’m getting inconsistent results, the ink doesn’t fully transfer over to the garment, what am I doing wrong?
Laser Transparent
Classic & Universal
Laser Dark Cuttable
Multi Trans
- Multi-trans Pro Instructions
- Multi Trans Select Instructions
- Multi Trans Metallic Instructions
- Multi Trans Instructions
- Can I use the Multi Trans product on a clam press?
- Do my products need to be specially coated to use this paper?
- What’s the difference between the Multi-trans Metallic and the Multi-trans Select, they both seem to print silver & gold?
- I would like to print onto black or coloured mugs, what paper would I need?
- Multi Trans Pro recommended press settings
- How do I remove white toner marks on my mug, after using forever multi-trans paper?
- I see glue or a faded background on my prints after applying multi-trans paper to my hard surface product.
Waterslide
Hot Stamping Foils
Subli-Light (No Cut)
Laser Tattoo Paper
Subli-Flex (No Cut)
Subli-Dark (No Cut)
Five Star Universal
FAQs
- Can I use any heat press with the Forever transfer papers?
- The same area of my transfer keep failing, why is this?
- I didn’t purchase my printer from Amaya will you still support me using the transfer papers?
- What is your smallest quantity of paper I would have to purchase?
- Can I use both MAC and PC? Or Mac running Windows?
- What design software do I need?
- Can I try samples of the paper before purchasing a full pack?
- Do I need to have the Forever TransferRIP to use the transfer papers?
- Do I have to use special garments to use the products like dye sublimation?
- I have been using another product – how will the Forever transfer compare?
- My heat press has old transfers stuck to the plate – will this be ok?
- How should I store my transfer paper when not using it?
- The same area of my transfer keep failing, why is this?
- How to remove moisture in B paper
- How to store the B paper
- Forever - Types of Forever Papers
- Seven heat press tips and advice to achieve the best results
TransferRIP
- How much does my transfer cost to print?
- Forever TransferRIP recommended files
- Gridlines on Forever TransferRIP
- My artwork is not printing out at the correct size or orientation
- Removing a colour in the Forever TransferRIP
- Dongles and the importance of looking after them (Forever TransferRIP)
- RIP re-install on second computer
- Which settings to use in step 5 of TransferRIP
- An overview of how to rasterise your artwork
- Removing background in the TransferRIP
- What Does Micro Mask Mean In The Forever TransferRIP Software?
- What do all the options in step 4 of the Forever TransferRIP mean?
- What files does the TransferRIP support?
- Does TransferRIP work with MAC OS?
- My TransferRIP crashes as soon as I go to step 3 of the software.
- Error message: disk I/O error (10) is seen.
- TransferRIP - Error message (11): database disk image is malformed is seen
- TransferRIP: Error message: "I'm quitting now!"
- Error message "0": I cannot install TransferRIP. It always shows a "0" error.
- Can I save jobs in the TransferRIP?