For Paper and Wood
Printer Settings:
-
Paper Settings: Heavy Paper or similar
-
Printer Settings: Multi-Purpose Tray
-
Image Mode: Mirrored
-
Image Preparation:
B&W Printers:100% Black
CMYK Printers: 400% Black(C : 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
WHITE TONER Printers: 300% Black(C : 100% + M: 100% + Y: 100% = 300% Black)
Transfer Settings:
Wood
2-3 bar/medium
130°C/265°F
90 Seconds
Cold
Paper/Card
2-3 bar/medium
150°C/300°F
10 Seconds
Cold
Substrate
Pressure
Temperature
Time
Peel
Transfer Application: Paper/Card
-
Place your transfer paper onto the substrate on which you want to press.
-
When the substrate has completely cooled down, carefully remove the transfer paper.
-
Cover everything with a sheet of Matt Finish Economy. (If the surface is uneven, use a thin silicone pad with 1mm thickness)
-
Close the press using the settings above.
-
After the pressing process, place your substrate to one side and allow it to cool down.
Transfer Application: Wood/Rough Surfaces
-
When the substrate has completely cooled down, carefully remove the transfer paper.
-
Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
-
Cover everything with a sheet of Matt Finish Economy.
-
Place your transfer paper onto the substrate on which you want to press.
-
Close the press using the settings above.
-
After the pressing process, place your substrate to one side and allow it to cool down.