EMT16X Trace and Sew

Sewing your design

A general checklist for sewing a design would be:

Load a Design
Set the Color Sequence
Select a Hoop
Set the Machine Speed
Set the Machine Speed
Set the Acti-feed
Check Design Orientation
Hoop the Garment
Load the Hoop Onto the Machine
Adjust the Presser Foot
Position the Design in the Hoop
Trace the Design

If you have done all of the above, you are ready to press the start button and watch your design sew.

Video Demonstration:

After the Design is Sewn

After the design is complete, remove the hoop from the machine by gently lifting the spring clips and pulling the hoop free of the hoop arms. Before giving the garment to the customer, you will want to remove backing, hoop rings, and any toppings used. This is discussed in the Finishing a Garment section.