Overview of Epson G9000 & Adkins MAX 1600 Dryer maintenance procedures
It's important that you follow the maintenance procedures as recommended to keep your printer running at optimum performance. This will help to ensure you are producing perfect prints and minimise any downtime.
Please leave the printer powered on all of the time so that the automated maintenance features can function.
DAILY START-UP MAINTENANCE
- Confirm environment conditions are good to print
| Temperature | Humidity | |
| Optimum | 20°C - 25°C | 40-60% |
| Range | 10°C - 35°C | 20-80% |
-
Agitate the white ink pouches
- Print a nozzle check pattern
- Perform a head clean if any nozzles are missing
- Pre-heat the dryer for 30 minutes prior to use
DAILY SHUTDOWN MAINTENANCE
- Run the 'Pre-shutdown' function on the dryer
- Wipe down any residual oil within the dryer
- Remove remaining film from the printer and store in the original packaging
WEEKLY MAINTENANCE
- Cleaning around the print head
- Cleaning the suction cap
- Cleaning the platen of the printer
- Cleaning out the filter collection area
PERIODIC MAINTENANCE
- Replacing the ink pouches
- Emptying the waste ink
- Replacing the head cleaning set
- Replace the dryer filters every 400 hours or as needed